WORM GEAR SET 2MM OUTPUT SHAFT DIY ADJUSTABLE BRASS CINCH-WORM BRACKET 120:1

Description

AVAILABLE IN 19 DIFFERENT RATIOS IN OUR STORE !
BRASS ADJUSTABLE EZ CINCH-WORM BRACKET ! BRAND NEW !
MESHES WITH BONE COLORED GEAR WITH 2MM STEEL SHAFT.
THIS DOES INCLUDE A PIECE OF 2MM X 2" LONG STEEL SHAFT MATERIAL FOR THE OUTPUT GEAR. THIS SHAFT IS A PRESS FIT INTO THE BORE HOLE WHICH IS 1.9 MM.  THIS WAY THE SHAFT IS DRIVEN BY THE GEAR FOR FURTHER REDUCTION IF NEEDED OR TO DRIVE YOUR ITEM DIRECTLY.
PLEASE NOTE THAT THE WOOD BLOCK AND THE 2 WOOD SCREWS ARE NOT PART OF THE SALE.
THE LINE ON THE SURFACE OF THE GEAR THAT IS INDICATED IN THE PICTURES IS PART OF THE GEAR AND NOT A CRACK (THEY ALL HAVE THAT LINE)
THE OTHER ITEMS ARE SHOWN FOR DEMONSTRATION PURPOSES ONLY AND ARE NOT PART OF THE SALE. THE BRASS GEAR WITH BRASS SHAFT AND THE ADDITIONAL GEAR FOR THE 900:1 RATIO ARE JUST A
SUGGESTION AND ARE NOT INCLUDED.
IF YOU PAY BEFORE NOON EASTERN TIME I WILL MAIL YOUR ITEM THE VERY SAME DAY !
STANDARD RIGHT HAND THREAD SINGLE LEAD 120:1 RATIO !
This uses high-quality precision shaft material that is manufactured by K+S metals. The shaft goes through the bracket with a stainless washer on the worm end and a nylon washer on the other end. Then the assembly is held in place by a 5/64" shaft collar. The package also includes the hex key needed for the set screw in the shaft collar.
This is very easy to use for the DIY’er. The mounting bracket uses a slot (.125” wide) for mounting and is very easy to set up and get the correct tooth mesh. Any #4 screw will fit through the slot for mounting purposes.
WE CURRENTLY HAVE 19 DIFFERENT SIZES OR RATIO CHOICES IN ANOTHER LISTING !
THE WOOD BLOCK AND THE 2 STAINLESS SCREWS ARE NOT PART OF THE SALE.
If you have any questions please do not hesitate to ask !
Once again if you pay by noon Eastern time I will mail this is the very same day !