Sonotron NDT ISONIC 2005 Ultrasonic Flaw Detector - Olympus GE Zetec Panametrics

Description

Sonotron NDT ISONIC 2005 UT Flaw Detector
Stock #210423C
Included with Sale
-ISONIC 2005 Unit
-Hard Padded Transport Case
-Lithium Ion Battery
-Charger and AC Cable
Specifications:
Portable Smart All-in-One Ultrasonic Flaw Detector and Recorder
Single Channel / 2 Probe Terminals
Longitudinal, Shear, Guided, and Surface Waves Inspections
Enhanced Signal Evaluation for the Live and Frozen A-Scans
Manual / Semiautomatic / Automatic Scanning
Single Axis Encoder
Line Scanning with the Encoded or Time-Based Recording
Corrosion Profiling and Flaw Detection and Imaging
A-Scan, B-Scan, CB-Scan, and TOFD
Frequency Domain Signal Analysis (FFT) - Ultrasonic Spectroscopy
100% Raw Data Recording
Remote Control and Data Acquisition
Up To 20m Length of One Standard Line Scanning Record
Playback A-Scans for All Recorded Data
Defect Sizing and Pattern Analysis
Sun Readable High Color Touch Screen
VGA Output, USB and LAN Terminals
Compliance with ASME, EN, RBIM, etc
Multi-Axis Encoder (option)
Encoded XY- or more Complicate Scanning (option)
Interface Echo (option)
Sync In/Out Triggering Terminals (option)
Analogue RF Output (option)
ISONIC 2005
uniquely combines functionality and mobility of the high performance portable digital ultrasonic flaw detector with recording, imaging, and data processing capabilities of smart computerized inspection system
ISONIC 2005
allows resolving of a variety of ultrasonic inspection tasks:
A-Scan-based inspection
using conventional pulse echo, back echo attenuation, and through transmission techniques
Line Scanning and Recording:
Thickness Profile B-Scan Imaging and Recording
Flaw Detection B-Scan cross-sectional Imaging and Recording for the Longitudinal and Shear Wave Inspections
Flaw Detection / Corrosion Screening CB-Scan Horizontal Plane-View Imaging and Recording for the Shear, Surface, and Guided Wave Inspections
TOFD / CHIME Inspection – RF B-Scan and D-Scan Imaging
XY-Scanning and Recording with C-Scan and B-Scan Imaging
For all types of the Line Scanning and XY-Scanning coverage the A-Scans are recorded at each probe position and may be played back and evaluated at the postprocessing stage.This allows performing of the defects characterization through the echo-dynamic pattern analysis off-line
The Thickness Profile B-Scan is convertible into the format compatible with the various Risk Based Inspection and Maintenance (RBIM) procedures
ISONIC 2005
has practically unlimited capacity for the storage of the:
Single A-Scans
accompanied with the corresponding instrument settings
Ultrasonic signal spectrum graphs (FFT)
accompanied with the corresponding RF A-Scans and the instrument settings
Various
A-Scans sequence records
along with the corresponding
Thickness Profiles
,
B-Scans
,
CB-Scans
,
TOFD Maps
; each record is accompanied with the corresponding instrument settings
ISONIC 2005
complies with the requirements of the following National and International Codes:
ASME Section I – Rules for Construction of Power Boilers
ASME Section VIII, Division 1 – Rules for Construction of Pressure Vessels
ASME Section VIII, Division 2 – Rules for Construction of Pressure Vessels. Alternative Rules
ASME Section VIII Article KE-3 – Examination of Welds and Acceptance Criteria
ASME Code Case 2235 Rev 9 – Use of Ultrasonic Examination in Lieu of Radiography
Non-Destructive Examination of Welded Joints – Ultrasonic Examination of Welded Joints. – British and European Standard BS EN 1714:1998
Non-Destructive Examination of Welds – Ultrasonic Examination – Characterization of Indications in Welds. – British and European Standard BS EN 1713:1998
Calibration and Setting-Up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for the Detection, Location and Sizing of Flaws. – British Standard BS 7706:1993
WI 00121377, Welding – Use Of Time-Of-Flight Diffraction Technique (TOFD) For Testing Of Welds. – European Committee for Standardization – Document # CEN/TC 121/SC 5/WG 2 N 146, issued Feb, 12, 2003
ASTM E 2373 – 04 – Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD). - International Standard EN ISO 10863:2011
Non-Destructive Testing – Ultrasonic Examination – Part 5: Characterization and Sizing of Discontinuities. – British and European Standard BS EN 583-5:2001
Non-Destructive Testing – Ultrasonic Examination – Part 2: Sensitivity and Range Setting. – British and European Standard BS EN 583-2:2001
AD 2000-Merkblatt HP 5/3 Anlage 1:2015-04: Zerstörungsfreie Prüfung der Schweißverbindungen - Verfahrenstechnische Mindestanforderungen für die zerstörungsfreien Prüfverfahren - Non-destructive testing of welded joints – Minimum technical procedure requirements for non-destructive testing methods (Germany)
The zero point test and annual verification procedures of
ISONIC 2005
are fully compliant with the international standards below and the corresponding national norms
EN 12668-1. Non-destructive testing – Characterization a verification of ultrasonic examination equipment. Part 1: Instruments
EN 12668-3. Non-destructive testing – Characterization a verification of ultrasonic examination equipment. Part 3: Combined Equipment
Trade Ins:
We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request.
Payment terms:
We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to .000).  Businesses and Universities, please call for payment options.  Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction's end time we will assume they are forfeiting the auction and the item will no longer be available to them.
International Buyers:
We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.
Shipping Terms:
Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country.
* Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.
* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.
* Your phone number is required for shipping purposes, so please provide it with all correspondence.
* Please note that calculated shipping is based on UPS.  We also reserve the right to ship for the same cost via FedEx or other carriers.
Packaging:
All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process.
Feedback:
We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.
Warranty:
No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR).  For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs.
Return Policy:
You can return the item for any reason
within three days
. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips.  We strongly encourage you to study these images closely before you commit to purchasing the item. Please call or email us if you have any questions about anything that you are uncertain about. It is critical that you confirm that this item suites your needs within the
three day return policy
period. Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following:
*Return Shipping and insurance of the item to our Store at the following address:
*A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks.