MFD660C Intelligent Digital Ultrasonic Flaw Detector NDT Test Equipment

Description

MFD660C Intelligent Digital Ultrasonic Flaw Detector NDT Test Equipment
Display Resolution
(640×480 pixels) full digital true color TFT LCD
Blind Area
5MM
Flaw Sizing
Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
Weld Figure Feature
Weld Figure feature can be enabled when detecting the weld parts using angle transducer.
Auto-Calibration
Automated calibration of transducer zero offset and/or material velocity
Memory
be able to store, recall the A-Scan patterns and instrument settings.
Flaw Locating
Live display Sound-path, Projection (surface distance), Depth, Amplitude
Defect Quantification
directly display the result with db unit
Defect characterization
calculate the equivalent size of the flaw easily and quickly to facilitate the judgment of artificia
Curved Surface Correction
used to measure the surface distance and depth of defect on a curved surface
DAC/AVG
Y
AWS D1.1
one of the AWS（American Welding Society） standards
Crack Height Measuring
measure and display the height of a crack found inside the workpiece
Magnify Gate
spreading of the gate range over the entire screen width
Video Recording
more than 100 hours
A Scan Freeze
Display freeze holds waveform and sound path data
Coded Echo Color
locate the flaw position
B-Scan
display a graphical cross-section of the workpiece
Power-Saving Method
low power consumption
Protection Level
IP54
Communication Interface
High Speed USB2.0 port
DataPro Software
Y
Working Language
freely switch between Chinese and English
Total Weight
6.0KG
Measuring Range
(0 ~ 9999) mm in steel
Bandwidth
0.5 to 15MHz automatic matching according to the probe frequency
Material Velocity
(100 ~ 20000) m / s
Dynamic Range
≥ 36dB
Vertical Linear Deviation
≤ 2.0%
Horizontal Linear Deviation
≤ 0.1%
Resolution
> 40dB (5P14)
Sensitivity Leavings
62dB (flat-bottomed deep hole 200mmФ2)
Rejection
(0 to 80)% Linear without affecting the linearity and gain
Noise Level
≤ 8%
Probe Type
straight beam probe, angle beam probe, dual element probe, through-transmit probe
Gates
Wave-getting Gate, Wave-losing Gate, Single Gate Reading, Dual Gate
Alarm
Beep Alarm and LED light Alarm
Power Supply
DC 9V
Working Time
＞10 hours
Overall Dimensions
280 × 220 × 70(mm)
Operating Temperature
(-10 ~ 50) ℃
Relative Humidity
(20 ~ 95)% RH
Pulse Energy
200V, 300V, 400V, 500V selectable, suitable for various probe
Pulse Width
(30～510)ns range with continuous adjustment to match the different frequency probes
Probe Damping
200Ω、500Ωs selectable to meet different requirements for resolution and sensitivity.
Sampling
10 digits AD Converter at the sampling speed of 200MHz, waveform of highly fidelity.
Rectification
Positive half wave, negative half wave, full wave, RF
Gate Reading
optional for single gate and double gate reading mode, both peak and edge can trigger it
Gain
0 dB to 110 dB adjustable in selectable steps 0.1 dB, 1 dB, 2dB and 6dB
Transducer Connections
BNC or LEMO
Configuration
No.
Item
Qty
Remarks
Standard
config.
1
Main unit
1
With
full digital
TFT LCD Display
2
Straight Beam Probe
1
4 MHz, Φ10
3
Angle Beam Probe
1
4 MHz, 8 mm×9 mm, 60°
4
Probe Cable
1
Q9-C5
，
or optional C9- C5
5
Battery Module
1
8.8 amp hour
(MB-03)
6
Power Adapter
1
7
Supporting pillar
1
8
Attached files
1
9
Datapro Software
1
10
USB Cable
1
MUSB01
11
Power Cable
1
12
ABS Case
1
Optional config.
1
Protective Cover
and straps
for Main Unit
2
Dual-crystal Straight Probe
1
PAYMENT INFORMATION:
1.We can accept Credit Cards,Paypal,T/T,Escrow and so on.
2.The buyer is responsible for any tax and/or duty charged by their country.
INTERNATIONAL SHIPPING:
The package will be shipped by DHL, FEDEX or EMS. After we shipped the parcel,we'll fill in the tracking number and inform you by e-mail.Please write the correct address and telephone number when you make orders,so the courier can contact you when they deliver the parcel to you. thanks
WARRANTY INFORMATION:
1.All the products have been checked and packed in good condition before dispatch.
2.All the products with one year warranty.
3.If you find any quality problems,please send it back within 3 days,and we'll send you a new one or refund you the payment after we get the returned one.
4.Buyers have to pay for the return cost and we will pay the cost for resend
5.All products returned should be in new conditions.
FEEDBACK:
1.A good feedback is very important for our store,if you feel satisfied with our products,please give us  positive feedbacks.
2.Please contact us before leaving any negative or neutral feedback,We will work with you to solve any problems.