GE Inspections MIC-10/MIC-201 Hardness Tester - Olympus Panametrics Krautkramer

Description

GE/Krautkramer MIC 10 Hardness Tester
Stock #200114A
Included with Sale
-MIC-10 Hardness Tester Unit
-Hard Transport Case
-MIC 201 Probe
-Probe Cable
-Probe Handle
-Manuals/Documentation
Specifications:
Quick hardness testing wherever you wish.
As with all other hardness testers from our MICRODUR line, the MIC 10  operates according to the UCI method (Ultrasonic Contact Impedance). This method enables quick and easy measurement: position probe and read off the value. This operational ease is achieved because the Vickers diamond indent in the material’s surface is electronically measured and instantly displayed as a hardness value without using the cumbersome optical evaluation of a microscope normally associated with Vickers hardness testing.
The small, handy MIC 10 makes life easy for you: a hardness tester that you can take anywhere - on scaffolds for testing large containers and pipes, or for testing components at any location. The small narrow probes even enable you to make measurements on positions difficult to access, such as tooth flanks or roots of gears.
You can measure in any direction, e.g. in the horizontal or overhead positions. The instrument carrier and prop-up stand permits two hand operation, for correct probe positioning and guidance.
Easy operation, high performance and unique data processing.
By pressing a key, you can display your reading as a single value or as the active arithmetical average value of a hardness measurement set. Editing of erroneous single values, without having to interrupt the measurement set, is just as simple. Adjustable alarm thresholds show you critical measurement values both visually and with audiable alarms. The calibration parameters for measurements on low and non-alloyed steel are preprogrammed into the MIC10; however, the instrument can be easily and quickly recalibrated to other materials.
Instrument operation can be customized for specific testing requirements: unnecessary functions can be inhibited, e.g. various hardness scales or the recalibration capability. This reduces key presses and simplifies operation.
Saving data - unlimited possibilities.
We have given a lot of thoughts to the subject of saving data and have come up with the MIC 10 DL in order to give you special support with repetitive testing and documentation. Memory cards are available in addition to the internal memory of the instrument, these not only store measurement data but also material dependent instrument settings and report formats. You are able to calibrate the instrument automatically for specific material using the information stored on the memory card. Reports can be created in an individual format and printed via the RS 232C interface of the MIC 10. Once again, the operation is simple: switch on data logger or insert a memory card and measure.
After measurement, the complete  measurement set is automatically stored at the next available location and can be recalled at any time, displayed and printed.
Additionally, the user programs of the UltraHARD series offer you a range of possibilities for data transfer to a PC and further data processing like evaluation, statistics and documentation.
Specifications:
Method of Measurement:
Vickers penetration with indentation evaluation by the UCI method under load (diamond angle 136-degree)
UCI Probes (To be selected according to application):
Handheld Probes:
10 N (1 kgf):
standard
MIC 201-A
short
MIC 201-AS
extended
MIC 201-AL
50 N (5 kgf):
standard
MIC 205-A
short
MIC 205-AS
extended
MIC 205-AL
98 N (10 kgf):
standard
MIC 2010-A
Motor Probes:
8.6 N (0.9 kgf):
MIC 211
3 N (0.3 kgf):
MIC 2103-A
1 N (0.1 kgf):
MIC 2101-A
Range:
20-1740 HV
Display:
4-digit LCD with switchable backlight
Weight:
Approx. 300g
Dimensions:
160 x 70 x 45 mm, 6.3 x 2.8 x 1.8 inches (W x H x D)
Permissible Ambient Temperature:
In operation
: -15C to 55C (5F to 131F),
In storage
: -20C to 60C (-4F to 140F)
Power:
2 x 1.5V AA Batteries
Operational Duration:
Approx. 15 hours without backlight
Interface (for version MIC-10 DL):
RS232C bidirectional
Data Logger (for version MIC-10 DL):
Internal memory for up to 1800 measurements, memory card for up to 580 measurements. Dependent on the number of measurements per set. Warning given with memory overflow.
Statistics:
Display of the average value. For version MIC 10 DL: printout with maximum, minimum, average value, absolute and relative range, absolute and relative standard deviation.
Probe Accessories (purchased separately):
Handheld probe or motorized probe (selected according to application), guiding devices and test supports, TGDL/PC-data cable (version MIC 10 DL), application software
Trade Ins:
We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request.
Payment terms:
We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to .000).  Businesses and Universities, please call for payment options.  Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction's end time we will assume they are forfeiting the auction and the item will no longer be available to them.
International Buyers:
We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.
Shipping Terms:
Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country.
* Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.
* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.
* Your phone number is required for shipping purposes, so please provide it with all correspondence.
* Please note that calculated shipping is based on UPS.  We also reserve the right to ship for the same cost via FedEx or other carriers.
Packaging:
All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process.
Feedback:
We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.
Warranty:
No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR).  For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs.
Return Policy:
You can return the item for any reason
within three days
. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips.  We strongly encourage you to study these im
ages closely before you commit to purchasing the item.
Please call or email us if you have
any questions
about anything that you are uncertain about.
It is critical that you confirm that this item suites your needs within the
three day return policy
period.
Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following:
*Return Shipping and insurance of the item to our Store at the following address:
GP-Technical
246 Pooler Parkway Suite E
Pooler, GA 31322
(843)694-6535
*A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks.