Aluminum 6" Frame Extension + Extend Drive Shaft Tamiya 1/14 King Knight Hauler

Description

Pair Custom made Aluminum 6 inch Frame extension and a extended 14 inch drive shaft for Tamiya RC 1/14 Semi Truck
Description:
Pair Aluminum 6 inch Frame extension bar and a extended drive shaft for Most Tamiya 1/14 Semi Tractor Truck
Design use on Tamiya Semi Ladder Frame Rail
Will require to cut the frame in between the rear sleeper mount bolt hole and the front 5th wheel plate mount bolt hole, then drill 8 mounting hole install with the screws. This is only apply on a King Hauler model.
You might need to drill additional hole for the fender mount nuts or for additional gas tank as show in picture.
It will also fit other Tamiya 1/14 semi truck model, you need to look for a cutting point in order to install it.
a 14" extended drive shaft, you can adjust the length by cutting to the length you need.
Easy installation and still be able to use the stock frame rail.
Note:
Will require cutting and drilling on your own frame rail, come with bolts and nuts.
You will need to make sure the total length of the driveshaft you need it is less than 14 inch
Semi Truck show in picture is for reference only not included.